Pioneer VSX-529-K Operating Instructions Manual Download Page 64

Page: 64 / 66

Additional information

Specifications

Audio Section

Rated power output

(Front, Center, Surround)

. . . . . . . . . . . . . . . . . . . 130 W per channel (1 kHz, 6



, 1 %)

100 W per channel (20 Hz to 20 kHz, 8



, 0.09 %)

Total Harmonic Distortion

. . . . . . . . . . . . . . . . . 0.06 % (20 Hz to 20 kHz, 8



, 50 W/ch)

Frequency response (LINE Pure Direct mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hz to 100 kHz dB

Guaranteed speaker impedance. . . . . . . . . . . . . . . 6



to 16



Input (Sensitivity/Impedance)

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 mV/47 k



Signal-to-Noise Ratio (IHF, short circuited, A network)

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 dB

Video Section

Signal level

Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75



)

Tuner Section

Frequency Range (FM) . . . . . . . . . . . . . . 87.5 MHz to 108 MHz

Antenna Input (FM) . . . . . . . . . . . . . . . . . . . . 75



unbalanced

Frequency Range (AM) . . . . . . . . . . . . . . 531 kHz to 1 602 kHz

Antenna (AM). . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

Bluetooth

Section (VSX-824)

Version . . . . . . . . . . . . . . . . . .

Bluetooth

Specification Ver. 3.0

Output . . . . . . . . . . . . . . . . . .

Bluetooth

Specification Class 2

Estimated line-of-sight transmission distance*

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About 10 m

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 GHz

Modulation

. . . . . . . . . . . . .FH-SS (Frequency Hopping Spread Spectrum)

Supported

Bluetooth

profiles . . . . . . . . . . . . . . .A2DP, AVRCP

Supported Codec . . . . . . . SBC (Subband Codec), AAC, aptX

Supported contents protection . . . . . . . . . . . . . . . . . . SCMS-T
* The line-of-sight transmission distance is an estimate.

Actual transmission distances supported may differ

depending on surrounding conditions.

Bluetooth

Section (VSX-529)

Version . . . . . . . . . . . .

Bluetooth

Specification Ver. 2.1 + EDR

Output . . . . . . . . . . . . . . . . . .

Bluetooth

Specification Class 2

Estimated line-of-sight transmission distance*

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About 10 m

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 GHz

Modulation

. . . . . . . . . . . . .FH-SS (Frequency Hopping Spread Spectrum)

Supported

Bluetooth

profiles . . . . . . . . . . . . . . .A2DP, AVRCP

Supported Codec . . . . . . . . . . . . . . . . .SBC (Subband Codec)

Supported contents protection . . . . . . . . . . . . . . . . . . SCMS-T
* The line-of-sight transmission distance is an estimate.

Actual transmission distances supported may differ

depending on surrounding conditions.

Digital In/Out Section

HDMI terminal . . . . . . . . . . . . . . . . . . . . . . . . . . Type A (19-pin)

HDMI output type . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V, 100 mA

HDMI input/MHL terminal . . . . . . . . . . . . . . . . . . . 5 V, 900 mA

USB terminal . . . . . . . . .USB2.0 High Speed (Type A) 5 V, 1 A

iPod terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB

ADAPTER PORT terminal . . . . . . . . . . . . . . . . . . . . 5 V, 100 mA

Network Section

LAN terminal . . . . . . . . . . . . . . . . . . . . 10 BASE-T/100 BASE-TX

Miscellaneous

Power Requirements . . . . . . . AC 220 V to 230 V, 50 Hz/60 Hz

Power Consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 W

In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 W

In standby (HDMI Control on) . . . . . . . . . . . . . . . . . . . 0.3 W

In standby (Network Standby on) . . . . . . . . . . . . . . . . 3.0 W

In standby

(HDMI Control on, Network Standby on) . . . . . . . . . . 3.0 W

Auto Power Down. . . . . . 15 min (default), 30 min, 60 min, off

Dimensions . . . . . .435 mm (W) x 168 mm (H) x 331.5 mm (D)

Weight (without package) . . . . . . . . . . . . . . . . . . . . . . . . 8.6 kg

Furnished Parts

Microphone (for Auto MCACC setup). . . . . . . . . . . . . . . . . . . 1

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Dry cell batteries (AAA size IEC R03) . . . . . . . . . . . . . . . . . . . 2

AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Quick start guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Brochure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SPEAKER CAUTION Sheet (English only) . . . . . . . . . . . . . . . 1

Power cord

These operating instructions (CD-ROM)

Note

•

The specifications are applicable when the power supply is

230 V.

•

Specifications and the design are subject to possible

modifications without notice, due to improvements.

•

This product includes FontAvenue

fonts licensed by NEC

Corporation. FontAvenue is a registered trademark of NEC

Corporation.

•

Microsoft, Windows, Windows Media and Windows Vista are

either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

•

Android and Google Play are trademarks of Google Inc.

Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, DTS-HD, the
Symbol, & DTS and the Symbol together are registered
trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

Summary of Contents for VSX-529-K



































































Search results

Summary of Contents for VSX-529-K

Reviews:

Related manuals for VSX-529-K

Brands by name

Popular brands

Pioneer VSX-529-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-529-K

Reviews:

Related manuals for VSX-529-K

Brands by name

Popular brands