Connecting your equipment
2
2
15
4
34
6
Connecting your component with no HDMI
terminal
This diagram shows connections of a TV and DVD player (or
other playback component) with no HDMI terminal to the
receiver.
Note
•
In order to listen to the audio from the TV that is connected
to this receiver using a analog audio cables, set-up for
analog audio input is required (see
The Input Assign menu
on page 32
).
•
You can only connect one component to the optical input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable,
first, switch to the
DVD
(DVD player) or
SAT/CBL
(set-top
box), then press
SIGNAL SEL
to choose the audio signal
O1
(OPTICAL1) (see
Selecting the audio input signal
on
page 21
•
You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the
DVD
(DVD player) or
SAT/CBL
(set-top box),
then press
SIGNAL SEL
to choose the audio signal
C1
(COAXIAL1) (see
Selecting the audio input signal
on
page 21
.
VIDEO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
ANALOG AUDIO OUT
VIDEO OUT
OPTICAL
IN1 (TV)
ANALOG
IN1 (CD)
DVD IN
SAT/CBL IN
MONITOR
OUT
COAXIAL
IN1 (CD)
VIDEO IN
DIGITAL AUDIO OUT
OPTICAL
R
L
ANALOG AUDIO OUT
Select one
TV
DVD player
Select one
This connection is
required in order to
listen to the sound
of the TV over the
receiver.
Select one
Set-top box
VSX-523_UCSMXCN_En_New.book 15 ページ ２０１３年５月２０日 月曜日 午後１時５９分
