Listening to your system
05
38
En
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 14), you must select the analog
multichannel inputs for surround sound.
1
VSX-517 model –
•
Press
DVD 5.1
(
SHIFT
+
DVD
) on the
remote control or DVD 5.1 on the front panel.
To cancel playback from the multichannel
inputs, use the
INPUT SELECTOR
buttons to
select a different input signal.
VSX-817 model
–
1
Make sure you have set the playback
source to the proper output setting.
For example, you might need to set your DVD
player to output multichannel analog audio.
2
Press
DVD/LD
.
3
Press
SIGNAL SELECT
on the front panel
to select the multichannel analog inputs.
DVD 5.1ch
shows in the display and the
ANALOG
indicator lights.
Selecting the front audio inputs
VSX-817 model only
When playing back a component connected to
the
MCACC
/
AUDIO IN
jack on the front panel,
set the source to
F.AUDIO
on the receiver.
1
Press F.AUDIO on the remote control.
You can also select the source by pressing
FRONT
AUDIO
on the front panel.
2
Playback the connected component.
Note
1 During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan-
nel levels can be set.
VSX517_817.fm 38 ページ ２００７年２月２２日 木曜日 午後８時１１分
