background image

 

Additional information

12

 

68

 

En

 

Surround sound formats

 

Below is a brief description of the main surround sound 
formats you’ll find on DVDs, satellite, cable and terrestrial 
broadcasts, and video cassettes.

 

Dolby

 

The Dolby technologies are explained below. See 
www.dolby.com for more detailed information. 

 

Dolby Digital

 

Dolby Digital is a multichannel digital audio coding system 
widely used in cinemas, and in the home for DVD and digital 
broadcast soundtracks. It can deliver up to six discrete audio 
channels, comprising five full range channels and a special 
LFE (low frequency effects) channel used mainly for deep, 
rumbling sound effects; hence the term “5.1-channel” Dolby 
Digital. 

In addition to the format features above, Dolby Digital 
decoders offer downmixing for compatibility with mono, 
stereo and Dolby Pro Logic audio from a number of bit rates 
and channels. Another feature, called Dialog Normalization, 
attenuates programs based on the average level of dialog in 
a program relative to its peak level (also known as Dialnorm) 
in order to achieve uniform playback level.

 

Dolby Digital Surround EX

 

Dolby Digital Surround EX (the EX stands for EXtended) is an 
extension of Dolby Digital encoding whereby a surround 
back channel is matrixed into the surround left/right 
channels for 6.1 channel playback. This allows for 
compatibility with Dolby Digital 5.1 channel decoding, as 
well as for decoding using Dolby Digital EX.

 

Dolby Pro Logic IIx and Dolby Surround

 

Dolby Pro Logic IIx is an improved version of the Dolby Pro 
Logic II (and Dolby Pro Logic) 

 

decoding

 

 system. Using the 

innovative “steering logic” circuit, this system extracts 
surround sound from sources as follows: 

 

Dolby Pro Logic

 

 – 4.1 channel sound (mono surround) 

from any stereo source 

 

Dolby Pro Logic II 

 

– 5.1 channel sound (stereo 

surround) from any stereo source

 

Dolby Pro Logic IIx

 

 – 6.1 or 7.1 channel sound (stereo 

surround and surround back) from two channel or 
5.1(and 6.1) channel sources

 

With two channel sources, the “.1” subwoofer channel is 
generated by bass management in the receiver.

 

Dolby Surround is an 

 

encoding

 

 system which embeds 

surround sound information within a stereo soundtrack, 
which a Dolby Pro Logic decoder can then use for enhanced 
surround listening with greater sound detail.

 

Manufactured under license from Dolby Laboratories. “Dolby”, 
“Pro Logic”, “Surround EX”, and the double-D symbol are 
trademarks of Dolby Laboratories.

 

DTS

 

The DTS technologies are explained below. See 
www.dtstech.com for more detailed information.

 

DTS Digital Surround

 

DTS Digital Surround is a 5.1-channel audio coding system 
from DTS Inc. now widely used for DVD-Video, DVD-Audio, 
5.1 music discs, digital broadcasts, and video games. It can 
deliver up to six discrete audio channels, comprising five full 
range channels, including an LFE channel. Higher sound 
quality is achieved through the use of a low compression 
rate, and high rates of transmittance during playback.

 

DTS-ES

 

DTS-ES (the ES stands for Extended Surround) is a decoder 
that is capable of decoding both DTS-ES Discrete 6.1 and 
DTS-ES Matrix 6.1 encoded sources. DTS-ES Discrete 6.1 
gives ‘true’ 6.1 channel sound, with a completely separate 
(discrete) surround back channel. DTS-ES Matrix 6.1 has a 
surround back channel matrixed into the surround left/right 
channels. Both sources are also compatible with a 
conventional DTS 5.1 channel decoder.

 

DTS Neo:6

 

DTS Neo:6 can generate 6.1 channel surround sound from 
any matrixed stereo source (such as video or TV) and from 5.1 
channel sources. It uses both the channel information 
already encoded into the source, as well as its own 
processing to determine channel localization (with two 
channel sources, the “.1” subwoofer channel is generated by 
bass management in the receiver). Two modes (Cinema and 
Music) are available using DTS Neo:6 with two channel 
sources.

 

DTS 96/24

 

DTS 96/24 is an extension of the original DTS Digital 
Surround which offers high quality 96 kHz/24-bit audio using 
a DTS 96/24 decoder. This format is also fully backward 
compatible with all existing decoders. This means that DVD 
players can play this software using a conventional DTS 5.1 
channel decoder.

 

“DTS” and “DTS-ES | Neo:6” are registered trademarks of DTS, 
Inc. “96/24” is a trademark of DTS, Inc.

VSX-1017TXV_KU.book 68 ページ 2007年4月12日 木曜日 午前11時32分

Summary of Contents for VSX-1017TXV-K - iPod Ready, XM Satellite











































































Reviews: