Controls and displays
04
23
En
12
PHONES
jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
13 Input source buttons
Press to select an input source.
14
VIDEO/GAME INPUT
See
Connecting a component to the front panel inputs
on
page 17.
15
MCACC SETUP MIC
jack
Use to connect the supplied microphone.
16
SYSTEM SETUP
Press to access the System Setup menu (see page 35).
17
RETURN
Press to confirm and exit the current menu screen.
18
TONE
Press this button to access the bass and treble controls,
which you can then adjust with the
MULTI JOG
dial
(page 32).
19
TUNING/STATION
Use to find radio frequencies and to select preset
stations (page 33).
20
TUNER EDIT
Use with the
MULTI JOG
dial to memorize and name
stations for recall
(page 33).
21
SPEAKERS
Use to change the speaker system (page 48).
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver’s remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
DOW
N
30
30
7 m (23 ft.)
DOW
N
VSX-1017TXV_KU.book 23 ページ ２００７年４月１２日 木曜日 午前１１時３２分
