BASIC
49
En
Basic Operation
Listening Modes
The five listening mode types on the amplifier are explained here. These can be turned on from the front panel
or from the AMPLIFIER MAIN screen on the remote control. To select listening modes see page 46.
The kind of playback you can get in the listening modes depends on what kind of source (DVD, etc.) you are
using. The basic distinction is between 2 channel sources and multichannel sources. The playback available to
you with these modes will differ depending on the source, speaker configuration the LISTENING CH SELECT
setting. This is explained below.
Basically the ADVANCED CINEMA mode is for movie sources and the ADVANCED CONCERT mode is for music
sources. The STANDARD, HOME THX and STEREO modes can be used with any source though the latter won't
offer surround sound. Try different settings with various soundtracks to see which you like.
You must choose one of the surround modes in order to get surround sound. Depending on your setup, in
STEREO mode only the front two speakers, and sometimes the subwoofer (if you have one), are used.
STEREO modes
When a source is played in this mode, it plays through just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby Digital, MPEG and DTS multichannel sources are
downmixed to stereo.
STEREO
In STEREO mode the audio plays according to the surround setup settings and you can still use Acoustic
Calibration EQ, Digital NR, Midnight mode, Loudness mode and Tone Control functions.
DIRECT
In DIRECT mode, the audio passes through the shortest signal path possible to remain as close to the source
audio quality as possible.
Note: If you switch on Acoustic Calibration EQ, Digital NR, Midnight mode, Loudness mode or Tone Control
when DIRECT is selected, the amplifier automatically switches to STEREO.
STANDARD modes
This mode is for pure decoding of Dolby Digital, MPEG, Dolby Surround and DTS sources as well as surround
matrix decoding of 2 channel sources. It is good for enjoying regular movies/videos that have been recorded in
Dolby Digital, Dolby Surround. DTS, STANDARD TX/SX is also the basic mode for enjoying sources with
surround and surround back channels. For more detailed information see p.12, 26, 38-40. The display will show
you what kind of source (Dolby Digital, DTS, etc.) is being played.
For 2 Channel Sources:
2
PRO LOGIC II MOVIE
This mode gives 5.1 channel surround sound. It is suitable for movies, especially those recorded in Dolby
Surround. The channel separation and movement of surround effects is comparable to Dolby Digital 5.1.
2
PRO LOGIC II MUSIC
This mode gives 5.1 channel surround sound and is suitable for music. Compared to the Movie Mode, the
surround effect is more enveloping.
2
PRO LOGIC
This mode gives 4.1 channel surround sound. It is less sensitive to the quality of the source material, so
may be useful when PRO LOGIC II MOVIE/ MUSIC modes do not give good results.
NEO:6 CINEMA
This mode gives 6.1 channel surround sound and is suitable for movies. The NEO:6 Cinema mode delivers
good channel separation for movie soundtracks.
NEO:6 MUSIC
This mode gives 6.1 channel surround sound and is suitable for music. The NEO:6 Music mode plays the
stereo source as is through the front left/right speakers, and generates a natural, ambient surround and
center sound.
