SURROUND SETUP
45
En
Setting Up for Surround Sound
Check the Auto Settings
5
If you want to check what settings have been input for your surround sound parameters you can do it following
the steps below.
1
Switch on the amplifier and your TV.
Make sure your TV is set to this amplifier as you will use
the on-screen displays on your TV to follow these
instructions.
2
Press the SUB button on the remote
control's AMPLIFIER screen.
3
Press the SYSTEM SETUP button and
use the on-screen display (OSD) that
appears on your TV.
The SYSTEM SETUP menu appears on the OSD.
4
Use the
5∞
buttons to select
SURROUND SETUP and press ENTER.
5
CHECK should be selected, press
ENTER.
6
The first menu in which you can check
your settings will appear. This is the
speaker settings.
Navigate this menu with the
2
3
buttons.
7
When you want to check the next
settings select NEXT with the
5∞
buttons and press ENTER.
The order of the settings menus is: Speaker Systems;
Channel Delay; Channel Level; Acoustic Calibration EQ.
If you want to leave the settings check select RETURN
with the
5∞
buttons and press ENTER.
8
Continue to move through the menus
using the
5∞
buttons and pressing
ENTER until you are done checking the
settings.
9
To exit the this mode select RETURN
with the
5∞
buttons and press ENTER.
You will return to the SURROUND SETUP menu. Then
select EXIT and press ENTER to exit the setup process.
STATUS
SPEAKER
A/B
LOUDNESS
INPUT
ATT.
Amplifier
MAIN
SUB
SIGNAL
SELECT
TAPE 2
MONITOR
SYSTEM
SETUP
DISPLAY
DIMMER
VIDEO
SELECT
EFFECT/
CH SEL.
BASS/
ATREBLE
TONE
AMP
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
REMOTE
SETUP
CD-R/
TAPE1
CD
TUNER
VIDEO
SAT
TV
CONTROL
1
2
3
2.Surround Setup
[
Check
]
[ 1.Speaker Systems ]
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal EQ ]
[Return]
