10
English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
WARNING
Violet/white
See the section “When
connecting with a rear view
camera”.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed
pliers.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Power supply side
Ground side
Black (ground)
To vehicle (metal) body.
Fuse (10 A)
Fuse (10 A)
Parking brake
switch
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
Fuse (4 A)
Yellow
After making all other connections to this unit,
connect this to the positive
+
terminal of the
battery.
CAUTION
Attach a 20A fuse immediately prior to
the battery. Also, use heat resistant
battery cable with more than 5-square
millimeter sectional area.
Fig. 5
