English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
18
Mounting with Velcro Tape
Thoroughly wipe off the surface before
affixing the velcro tape.
Fig. 13
DIN Front/Rear-mount
This unit can be properly installed
either from “Front” (conventional DIN
Front-mount) or “Rear” (DIN Rear-
mount installation, utilizing threaded
screw holes at the sides of unit chas-
sis). For details, refer to the following
illustrated installation methods.
Before installing the unit
• Remove the holder. (Fig. 14)
Loosen the screws (2
×
3 mm) and
then remove the holder.
Fig. 14
DIN Front-mount
Installation with the rubber bush
1. Decide the position of the side
brackets. (Fig. 15)
When installing in a shallow space,
change the position of side brackets. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Fig. 15
Conceal tape
Side bracket
Flush surface screw (5
×
6 mm)
Holder
Screw (2
×
3 mm)
Velcro tape
(large) (hard)
Car mat or chassis
Velcro tape
(large) (soft)
Hide-away unit
