Pioneer Super Tuner IIID AVH-P5200BT, Operation Manual

Page: 65 / 96

2 Touch DT.WARNING to turn the warn-
ing tone on.
#
To turn the warning tone off, touch
DT.WARNING again.
Setting the rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
REAR
VIEW CAMERA IN ) when a rear view camera
is installed on your car and the gear shift is
moved to the
REVERSE (R) position.(For
more details, consult your dealer.)
!
After you set up the rear view camera set-
ting, move the gear shift to
REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
!
Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MENU / .
!
Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
Se-
lecting a source using the touch panel keys
on page 11.
1 Display the system menu.
Refer to Introduction of menu operations on
page 54.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R) position
!
Ground
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R) position
!
Off
–
When a rear view camera is not con-
nected to this unit
Auto EQ (auto-equalizing)
The auto-equalizer automatically measures
the car
’
s interior acoustic characteristics, and
then creates an auto-equalizer curve based on
that information.
WARNING
As a loud tone (noise) may be emitted from the
speakers when measuring the car's interior
acoustic characteristics, never perform auto EQ
while driving.
CAUTION
!
Thoroughly check the conditions before per-
forming auto EQ as the speakers may be da-
maged if these functions are performed when:
—
The speakers are incorrectly connected.
(For example, when a rear speaker is con-
nected as a subwoofer output.)
—
A speaker is connected to a power amp de-
livering output higher than the speaker
’
s
maximum input power capability.
!
If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in battery drainage. Be sure to place
the microphone in the specified location.
En
65
Section
14
Menu
operations
Menu operations