84
DEH-P930,P9300,P9350
Basic Operation
T
urning a source on or off
Y
ou can select the source you want to listen to.
T
o
switch to built-in CD player
, load a CD in this
product.
1.
Press SOURCE to select the desired
source (e.g., tuner).
Press SOURCE repeatedly to switch
between the following sources:
Built-in CD player
=
TV
tuner
=
T
uner
=
DAB tuner
=
Multi-CD player
=
External unit 1
=
External unit 2
=
AUX
=
T
elephone standby
2.
Press VOLUME to extend the VOLUME
outward.
•
When you press VOLUME, it extends out-
ward so that it becomes easier to turn. T
o
retract VOLUME, press it again.
3.
T
urn VOLUME
to adjust the volume.
4.
Press and hold SOURCE to turn the
source off.
Note:
•
External unit refers to a Pioneer product (such as
one available in the future) that, although incompat-
ible as a sour
ce, enables control of basic functions
by this product. T
wo external units can be con-
trolled by this product, although “External” is dis-
played whether you select external unit 1 or external
unit 2. When two external units are connected, the
allocation of them to external unit 1 or external unit
2 is automatically set by this product.
•
In the following cases, the sound sour
ce will not
change:
*
When no product corresponding to the sour
ce is
connected to this product.
*
No disc is set in this product.
*
No magazine is set in the multi-CD player
.
*
AUX (auxiliar
y setting) is set to off. *
W
hen
the telephone standby is set to off.
•
When this product’
s blue/white lead is connected
to the car’
s auto-antenna relay control terminal,
the car’
s auto-antenna extends when this produc-
t’s sour
ce is switched on. T
o
retract the antenna,
switch the sour
ce off.
S
OFT KEY
operation
SOFT KEY operation means that the function of
a button changes as indicated on the display
.
The multi-function buttons provide SOFT KEY
operation; the functions performed by the but-
tons change according to the function or setting
that has been selected.
The explanations given in this manual are
based on FORM 1 display
. If you have selected
FORM 2, the functions of some of the multi-
function buttons may be dif
ferent from those
indicated in the manual.
Important
In this manual, for operations using the multi-
function buttons the function displayed is used
as the name of the function button.
Multi-function buttons
Function names
“
3
”
Before Using This Product
U
sing the steering remote con-
troller
Precaution:
•
Do not operate this unit while manipulating the
steering wheel as this might result in a traffic acci-
dent.
•
If you have to operate this unit unavoidably when
driving, pay careful attention to the road ahead to
avoid the risk of being involved in a traffic accident.
•
If any of the following problems occur
, immediately
stop using this unit and consult with the dealer
from whom you pur
chased it:
– the unit is smoking.
– the unit is emitting an abnormal odor
.
– a foreign object has entered the unit.
– liquid has been spilled on or into the unit.
If you continue to use this unit without rectifying
the problem, the unit may be damaged badly
, result-
ing in a serious accident or fire.
•
Do not leave this unit free (unattached) inside the
car
. When the car stops or turns a cur
ve, the unit
might drop on the floor
. If the unit rolls under the
brake pedal, it might prevent the driver from brak-
ing properly
, causing serious trouble. Be sure to fix
this unit to the steering wheel.
•
Do not disassemble or modify this unit. T
o
do so
may cause a malfunction.
FUNCTION button and AUDIO button
Operation of the FUNCTION button and the
AUDIO button on the remote controller dif
fers
from the operation of the FUNC button and the
AUDIO button on the head unit. When operat-
ing the head unit, use the FUNC button and the
AUDIO button to select the appropriate menu,
then use the multi-function buttons to select the
mode. When operating the remote controller
,
however
, switch through the modes as
described below to select the mode.
FUNCTION button operation
•
Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch
between the following modes:
RPT
=
RDM
=
SCAN
=
T
.LIST
=
P
AUSE
=
TTLin
AUDIO button operation
•
Press AUDIO to select the desired mode.
Press AUDIO repeatedly to switch between
the following modes:
F/B
=
LOUD
=
SFC
=
EQ1
=
EQ2
=
ASL
=
POSI
=
T
.AL1
=
T
.AL2
=
SW1
=
SW2
=
HPF F
=
HPF R
=
SLA
=
A.EQ
=
D.A
TT
Summary of Contents for Super Tuner III DEH-P930
