Additional information
14
83
En
Engli
s
h
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
s
pañol
Using your own speaker cables
When connecting the speakers, you can
purchase and use your own speaker cables if
desired, in place of those furnished. In this
case, perform the following procedures to
attach the speaker cable adaptor to your own
cables:
1
•
While holding down the two buttons on
the adaptor, insert the wire ends of your own
cable into the adaptor.
• White, Red, Blue, Grey and Purple speaker
cable adaptors are provided as
accessories. Use these to attach your own
cables for the front left/right speakers,
surround left/right speakers and
subwoofer.
• Use the supplied Y- cable for center
speakers connections.
• Confirm the +/– polarities of the two wires
and the corresponding markings on the
adaptor, and be sure to insert the proper
wire core into the proper side.
• After inserting the wire cores, pull gently
on the cable to confirm that the wires do
not slip out.
• Be careful to prevent the cores of the two
wires from touching each other, since a
short circuit will result.
Note
1 • Speaker cables can be of sizes between 0.3 sq and 1.0 sq (equivalent to 22 gauge and 17 gauge, respectively).
Separately purchased
speaker cable
HTZ-LX61DV_En.book 83 ページ ２００８年７月３１日 木曜日 午前９時２６分
