Listening to the radio
08
47
En
Engli
s
h
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
s
pañol
Changing the noise cut mode
If you find that the AM sound quality is bad
even after trying the above, you may be able to
improve it using a different noise cut mode.
Just choose the one that sounds best.
1
Press after tuning to an AM radio
station.
2
Select ‘Tuner Setup’ then press
ENTER.
3
Choose ‘Noise Cut’ then press
ENTER.
4
Select a Noise cut mode (1, 2 or 3)
then press ENTER.
Memorizing stations
This system can memorize up to 30 stations,
stored in three banks, or classes (A, B and C) of
10 stations each.
1
Tune to an FM or AM radio station.
Select mono or auto-stereo reception (FM) or
the Noise Cut mode (AM) as necessary. These
settings are saved along with the preset.
2
Press T.EDIT.
3
Press to select one of the three
classes, then press ST
/
to select the
station preset you want.
You can also use the number buttons to select
a preset.
4
Press ENTER.
After pressing
ENTER
, the preset class and
number stop blinking and the system
memorize station.
Listening to station presets
You will need to have some presets stored to do
this.
1
Press to select the class in which the
channel is stored.
Press repeatedly to cycle through classes A, B
and C.
2
Select the station preset you
want.
• You can also use the number buttons on
the remote control to recall the station
preset.
SETUP
ENTER
ENTER
ENTER
T.EDIT
CLASS
ENTER
CLASS
ST
ST
HTZ-LX61DV_En.book 47 ページ ２００８年７月３１日 木曜日 午前９時２６分
