Other connections
12
60
En
Line Output setting
Use to select the audio down-mix method
when outputting Dolby Digital multi-channel
sound sources from the
AUDIO OUT
jacks.
1
1
Press SETUP.
2
Select ‘Sound Setup’, then press
ENTER.
3
Select ‘Line Output’, then press
ENTER.
4
Select a setting.
Select one of the following:
•
Lo/Ro(Stereo)
– A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
•
Lt/Rt
– A surround-compatible downmix
(left-total/right-total, or Lt/Rt) of Dolby
multichannel sources is output, (suitable
for Dolby Surround Pro Logic or other
matrix decoding).
The
L.OUT
indicator lights.
5
Press to exit.
Connecting the S-video output
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
•
Use an S-video cable to connect the
S-VIDEO OUT to an S-video input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
Note
1 • When the Line Output is switched to
Lt/Rt
, the sound function will be fixed at the current setting and cannot be changed.
The display will briefly flash
Line Out Mode
if an attempt is made to use a prohibited function.
• When the Line Output is to
Lo/Ro(Stereo)
, the audio from the analog output jacks may be interrupted, depending on the operation.
• When using DTS multi-channel sound sources, output is in
Lo/Ro(Stereo)
.
SETUP
ENTER
ENTER
ENTER
L
ANALOG
COAX
R
AUDIO IN
DIGITAL IN
XM IN HDMI
OUT
IN 2
IN 1
VIDEO OUT
VIDEO OUT
3
COMPONENT VIDEO
S-VIDEO
VIDEO
P
R
P
B
Y
To S-video input
TV
HTZ-LX61DV_En.book 60 ページ ２００８年７月３１日 木曜日 午前９時２６分
