50
EN
Settings
Sensor Settings
Sensor On/Off
Use the procedure below to turn sensors connected to the
bike on or off.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap a sensor check box to toggle it between on
and off.
A sensor connection is turned on if its check box is
selected.
You can check information about a sensor by tapping its
•
sensor name.
Sensor settings need to be configured for each bike. If this
•
device has multiple bikes registered, you need to configure
sensor settings for each of the registered bikes.
Ü
Bike Select (page 44)
Checking Sensor Information
Use the procedure below to check connected sensor device
information and to check the status of a sensor.
1
On the home screen, tap the [Sensors] icon.
This displays the sensor list.
2
Tap the sensor you want to check.
This displays sensor information.
Setting Item
Description
Device Number
Shows the sensor device number.
Manufacturer
Number
Shows the sensor manufacturer ID.
It is not shown for a speed & cadence
sensor.
Error Rate
Shows the error rate of data received from
the sensor.
OK:
•
It is receiving the data properly from the
sensor.
Not connected:
•
Sensor connection is disabled.
Processing...:
•
Sensor connection is enabled and the
device is searching for the sensor.
Battery
Shows the sensor battery voltage when the
sensor is connected.
It is shown only for PowerMeter, Pedaling
Monitor L, or Pedaling Monitor R.
Delete
Tap to delete the sensor from the sensor
list.
