Pioneer SC-1223-K Operating Instructions Manual Download Page 14

Page: 14 / 117

Controls and displays

10 MULTI-ZONE select buttons

Switch to perform operations in

ZONE 2

and

HDZONE

(

page 69

The

ZONE 3

button is not used with this unit.

11 Remote control LED

Lights when a command is sent from the remote control.

Switches the remote to control the receiver (used to select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.

13 /–

Use to set the listening volume.

14 MUTE

Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).

15 OPTION

The preset codes of desired devices can be registered in the remote control and button operations can be regis-
tered using the learning mode.

Summary of Contents for SC-1223-K






















































































































Search results

Summary of Contents for SC-1223-K

Reviews:

Related manuals for SC-1223-K

Brands by name

Popular brands

Pioneer SC-1223-K, Operating Instructions Manual

Search results

Summary of Contents for SC-1223-K

Reviews:

Related manuals for SC-1223-K

Brands by name

Popular brands