Getting started
01
9
En
English
Français
Deutsch
Nederlands
Italiano
Español
2
Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
•
Manual tuning
: Press
TUNE +/–
repeatedly to change the displayed
frequency.
•
Auto tuning
: Press and hold
TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
•
High-speed tuning
: Press and hold
TUNE
+/–
until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1
Tune to an FM radio station then press
SHIFT+SYSTEM SETUP
.
2
Use
/
(cursor left/right) to choose FM
MODE then press
ENTER
.
3
Use
/
(cursor up/down) to select
FM
MONO
then press
ENTER
.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select
FM AUTO
above to switch back to auto-
stereo mode (the stereo indicator (
) lights
when receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2
Press
SHIFT+SYSTEM SETUP
.
3
Use
/
(cursor left/right) to choose
‘ST.MEM.’ then press
ENTER
.
4
Use
/
(cursor up/down) to select the
station preset you want then press
ENTER
.
Listening to station presets
1
Make sure the
TUNER
function is selected.
2
Use the
ST +/–
buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect an external audio source (TV,
satellite receiver, etc.) to this system. See
Connecting auxiliary components
on page 24.
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Press
LINE
to select the source.
3
If necessary, start playback of the source.
DVD/CD
FM/AM
TUNER
LINE
XV-DV250-350.book 9 ページ ２００５年１月３０日 日曜日 午後５時５４分
