Additional information
08
36
En
Tuner
Error Messages
Resetting the system
Use this procedure to reset all system settings
to the factory default.
1
Switch the system on.
2
Press
STANDBY/ON
while holding
down the front panel FM/AM button.
The next time you switch on, all the system
settings should be reset.
Using the language code list
Some of the language options (see
Language
settings
on page 21) allow you to set your
preferred language from any of the 136
languages in the following
Language code list
.
1
Select ‘Other Language’.
2
Use
/
(cursor left/right) to select
either a code letter or a code number.
3
Use
/
(cursor up/down) to select a
code letter or a code number.
See the
Language code list
(next page) for a
complete list of languages and codes.
Problem
Remedy
Considerable noise in
radio broadcasts.
• Connect the AM antenna (refer to the Setup Guide) and adjust the direction
and position for best reception. You may also connect an additional internal
or external AM antenna (refer to
Connecting auxiliary components
on
page 24).
• Fully extend the FM wire antenna, position for best reception, and secure to
a wall. You may also connect an outdoor FM antenna (see
Connecting external
antennas
on page 25).
• Turn off or move other equipment that may be causing the noise.
• The tuning interval is incorrect for your country or region. Try switching the
tuning interval (frequency step) (see
Frequency step setting
on page 33).
Auto tuning does not
pick up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
Message
Description
REC MODE
• An operation is prohibited because the Recording Mode is on (page 24).
SND DEMO
• The sound demo is on. See
General
in
Troubleshooting
on page 34.
CANNOT
• An operation is prohibited because headphones are connected, or
TEST
TONE
is pressed during disc playback.
STEREO
• An operation is prohibited because the
DVD/CD
function isn’t selected.
TRAY LOCK
• The tray lock is on. Contact your Pioneer authorized dealer for instructions.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
XV-DV250-350.book 36 ページ ２００５年１月３０日 日曜日 午後５時５４分
