Pioneer RM-V1000NU, Technical Manual

Page: 80 / 159

79
ADJUSTMENTS
[6] <GST> (GET STATUS)-Various setting states are output.
1
STX (02H)
2
Version of microcomputer software (5 BYTE)
Example)V1.00:Indicates VERSION 1.00.
3
Input function state (3 BYTE)-Output in command name.
Example)IN1:Indicates VIDEO input.
4
MULTI state (3 BYTE)-Output in command name.
Example)MLY:Indicates MULTI=ON.
5
COLOR MODE state (3 BYTE)-Output in command name.
Example)CM1:Indicates COLOR MODE=1.
6
COMBINATION state (3 BYTE)-Output in command name.
Example)CMY:Indicates COMBINATION=ON.
7
TV SYSTEM MODE state (3 BYTE)-Output in command name. (Note 1)
Example)TVA:Indicates TV SYSTEM=AUTO.
8
Indicates the input discriminating result of TV SYSTEM=AUTO (Note 2)
Example)NTS:Input discriminating result indicates NTSC.
9
Deflection and convergence data memory area state (3 BYTE) (Note 1)
US1:Indicates that CONV.MEMO-1 is selected.
US2:Indicates that CONV.MEMO-2 is selected.
US3:Indicates that CONV.MEMO-3 is selected.
0
OSD display, enable/disable setting state (3 BYTE)-Output in command name.
Example)DIY:Indicates OSD display enabled.
-
ETX (03H)
(Note 1) When INPUT=VIDEO or Y/C, the VIDEO or Y/C input setting is output.
When INPUT=RGB, the RGB input setting is output.
(Note 2) If it does not TV SYSTEM=AUTO, mode will output the same state of 7 TV SYSTEM.