manualshive.com logo in svg

Pioneer RM-V1000NU, Technical Manual

Share
Download
Pioneer RM-V1000NU Technical Manual Download Page 109

108

APPENDIX (MVP manual)

5. Adjustment Mode

 NTSC Input Board Adjustment Mode:

Mode in which the adjustment commands of the NTSC input board can be executed.
(Adjustment items of the output board can be executed when desired)
To end the adjustment mode, input AJN.

Operation mode
AJYB Enables the NTSC input board to be adjusted.
AJN

Adjustment mode end

Power ON

Normal mode

Operation mode

@h

NTSC input board adjustment mode

AJYB

AJN

 Option RGB board adjustment mode:

Mode which enables communication with the optional RGB board (RMD-V3020).
In this mode, only the RGB board adjustment command is accepted. The operations of
each switch on the front panel are not accepted.
In particular, when Mode switches are operated, the video output will be disrupted. Set
the switches properly after ending the communication mode.

Operation mode

:A Sets into the communication (adjustment) mode with the RGB board.
: Ends the RGB board adjustment mode.

!

Summary of Contents for RM-V1000NU
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands