manualshive.com logo in svg

Pioneer RM-V1000NU, Technical Manual

Share
Download
Pioneer RM-V1000NU Technical Manual Download Page 139

138

APPENDIX (MVP manual)

CHECK SHEET

<CUBE Adjustment>

1. Preparations

1

Connect the power supply, and connect the cable for input signals and ABL link cable (control cable).

2

Place the connected cables neatly.

3

After completing the above 

1

 and 

2

, turn on the power and perform aging for one hour.

4

Prepare the signals required for adjustments.

2. Before Starting Adjustments (Set Conditions) .............................P. 36

1

Set whether to perform the adjustments using the remote control or personal computer.

2

Check the TV SYSTEM setting.
Check the convergence memory and white balance memory used for the adjustments.

3

Check and set the STATUS.
MULTI ON/OFF, COMBINATION ON/OFF, ABL link switch settings (3-levels).

4

Recording the settings in the memory.

3. Setting ID .........................................................................................P. 39

1

Set the ID to each CUBE.
(Note) The following IDs are provided at shipment.

4. Adjusting The Screen

1

Adjust the size of each screen. ................................................................................................................. P. 45

2

Adjust the convergence of each screen. .................................................................................................. P. 46

3

Adjust the link of each screen. ................................................................................................................ P. 103

4

Adjust the W/B of each screen. ................................................................................................................. P. 62

5

Adjust the ABL level. ................................................................................................................................. P. 66

6

Adjust the color using the image to be transmitted. .............................................................................. P. 67

7

Check the whole screen.

ID=11

ID=12

ID=13

ID=14

Summary of Contents for RM-V1000NU
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands