Connecting up
02
14
En
Chapter 2
Connecting up
Rear panel connections
1
VHF/UHF IN/OUT
Connect your TV antenna to the
VHF/UHF IN
jack. The
signal is passed through to the
VHF/UHF OUT
jack for
connection to your TV.
2
COMPONENT VIDEO OUT
A high-quality video output for connecting to a TV or
monitor with a component video input.
3
Audio/video outputs 1 and 2
Two sets of audio/video outputs (stereo analog audio;
composite and S-video video) that you can use to connect
TVs or monitors.
4
Audio/video inputs 1 and 3
Two sets of audio/video inputs (stereo analog audio;
composite and S-video video) that you can use to connect
to satellite receivers, TVs, VCR or other source
component for recording.
5
CONTROL IN
Use to control this recorder from the remote sensor of
another Pioneer component with a
CONTROL OUT
terminal and bearing the Pioneer
mark. Connect the
CONTROL OUT
of the other component to the
CONTROL IN
of this recorder using a mini-plug cord.
6
OPTICAL DIGITAL OUT
A digital audio output for connecting to an AV amp/
receiver, Dolby Digital/DTS decoder or other equipment
with optical digital input.
7
AC IN
Connect to a power outlet using the supplied power cable
after making all other connections.
Front panel connections
On the left side of the front panel a flip-down cover hides
a third audio/video input, consisting of an S-video and
standard (composite) video jack, and stereo analog audio
jacks.
On the right side is the DV input/output i.LINK connector.
This is for connection to a DV camcorder.
COMPONENT VIDEO OUT
DIGITAL OUT
AC IN
OPTICAL
CONTROL
IN
Y
P
B
P
R
IN
OUT
VHF/UHF
R
L
AUDIO
VIDEO
S-VIDEO
R
L
AUDIO
VIDEO
S-VIDEO
OUTPUT 2
OUTPUT 1
INPUT 3
INPUT 1
/
AUTO START REC
1
3
2
4
5 6
7
PULL-OPEN
STANDBY/ON
DVD
HDD
OPEN/CLOSE
REC
ONE TOUCH COPY
DV IN/OUT
VIDEO
S-VIDEO
DV IN/OUT
