manualshive.com logo in svg

Pioneer PDP-6070PU, Service Manual

Share
Download
Pioneer PDP-6070PU Service Manual Download Page 137

 

PDP-6071PU

137

5

6

7

8

5

6

7

8

C

D

F

A

B

E

 

8.1.4  REMOTE CONTROL CODE

Remote control codes in Service Factory mode.

Muting

Switching the main items

Shifting to the next main item (top).

  (DOWN)

Switching the subtitled items.

Shifting downward to the next subtitiled item.

  (UP)

Switching the subtitled items.

Shifting upward to the next upper layer.

    (LEFT)

Decreasing the adjustment value.

Decreasing the adjustment value.

ENTER/SET

Switching the layers.

Shifting downward or upward to the next lower or upper layer.

INPUT

Selecting INPUT.

Shifting the INPUT to the next function.

INPUTxx

Selecting INPUT.

Switching the INPUT to xx. (xx=1-6 etc)

CH+/P+

Increasing the channel number.

CH-/P-

Decreasing the channel number.

Advanving.

Numeric keys

Function: TV

Function: TV(previously selected channel number is selected).

POWER

Power OFF

Turning the power off.

Factory ON(Non-Factory mode)

In Non-Factory mode , turning Factory mode on.

HOME MENU *

1

Menu ON.

In Factory mode , turning Factory mode off, and Menu mode on.

FACTORY

Factory OFF(Factory mode)

In Factory mode , turning Factory mode off.

Volume UP.

Increasing 10 the adjustment value. (PANEL FACTORY)

VOLUME-

Volume DOWN.

Increasing 10 the adjustment value. (PANEL FACTORY)

DRIVE ON/OFF *

2

Drive Mode OFF.

Turning Drive mode off.

INTEGRATOR *

1

[ Note ]  *

1

 :  A pertinent key that exists in the service remote control, becomes effective only in the factory and integrator mode.

                      Please use the remote control of the attachment when you normally operate it in the mode (home menu operation, etc.).
               *

2 

:  When ten seconds have passed since the [ DRIVE ON/OFF ] key was pressed at the standby, it becomes invalid.

                      Please press [ POWER ] key from the [ DRIVE ON/OFF ] key pressing within ten seconds when you do power supply ON
                      while driven OFF.

INTEGRATOR MENU ON

Enter INTEGRATOR MODE.

SR/R Keys

Basic Functions

Remarks

    (RIGHT)

Increasing the adjustment value.

Increasing the adjustment value.

Remote Control Unit

for Servicing

Summary of Contents for PDP-6070PU

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands