Pioneer PDK-5008, Technical Manual

Page: 100 / 185

100
3
8
Hexagon nut with
spring washer (4 pcs.)
Attach the nut up
to the base of the
bolt as far as pos-
sible.
How to mount standard optional items (PDK-4005)
2) Assembly procedure
1. Temporarily tighten the vertical frame ( 1 ) and the horizontal frame ( 2 ) by using the M5 plus/minus screw with
washer ( 5 ) .
Before screwing together the horizontal frame and
vertical frame, place the frames on a flat surface, as
shown, and confirm that the holes match up correctly.
Table or similar flat surface
When the frames are placed on a flat surface
as above, inserting bolts into the holes is
difficult.
<Incorrect>
1
1
2
2
3
3
3
3
5
5
5
5
Caution
When assembling the PDP bracket, install an M8 nut, as shown, to keep the Special eye bolt from loosening.
(This step is not described in the instruction manual.)
Viewed from below.
6
7
7
8
8
8
8
6
6
7
7
7
9