Pioneer PD-70AE, Instruction Manual

Page: 4 / 144

4
> Before Start > Part Names > Install > Playback
Advanced Setup | Others
Front Panel
Part Names
1.
Í
/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. When
starting up the unit, the indicator in the center of the button lights blue.
2. STANDBY indicator: Lights red when the unit is in standby mode.
3. Disc tray: Place discs here. 8-cm discs can also be used.
4.
<
button: Open or close the disc tray.
5. Play buttons:
:6
: Return to the beginning of the track being played. Press again to move to the
track before. Press and hold to rewind the track quickly.
1
/
;
: Play or pause play.
59 : When pressed during play, move to the next track. Press and hold to fast-
forward through the track.
∫
: This button stops playback.
6. Remote control sensor
0
The signal range of the remote controller is within about 23´/7 m, at an angle of 30° to
either side.
7. CD/SACD button/indicator: Switch between CD/SACD as the source. When playing a
hybrid SACD, the layer being played switches if you press this during play. ( P18)
The indicator lights blue when SACD is selected.
8. DIRECT button/indicator: Switch the DIRECT mode ON and OFF. ( P15)
The indicator lights blue when the DIRECT mode is ON.
9. Display ( P7)
10.SOURCE button: Switches the source to be played.
11. SETUP button: Displays the SETUP menu. (
P16)


   
    
SN29403157_PD-70AE_En.book 4 ページ ２０１７年８月２４日 木曜日 午後４時２１分