Pioneer PD-70AE, Instruction Manual

Page: 16 / 144

16
> Before Start > Part Names > Install > Playback
Advanced Setup | Others
Advanced Settings
Advanced Setup
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Press SETUP on the remote controller.
2. Select the content or the setting with the cursors on the remote controller and press
ENTER to confirm your selection. To return to the previous screen, press RETURN.
3. To exit the settings, press SETUP.
AUTO STANDBY
This setting places the unit on standby automatically after 20 minutes of inactivity without
any audio input.
"ON" (Default Value): The unit will automatically enter standby mode.
"OFF": The unit will not automatically enter standby mode.
POWER ON PLAY
You can set it so that the disc automatically starts playing when this unit is turned on.
0
By using an externally connected auto timer, you can use timer play when the power
automatically switches on.
"ON": To play discs automatically
"OFF" (Default Value): When discs are not to be played
DIGITAL OUT
Make settings for digital audio output. When not connecting to the DIGITAL OUT OPTICAL/
COAXIAL jack, you can listen to even clearer audio by setting this OFF.
"ON" (Default Value), "OFF"
DIGITAL FILTER
You can select the type of DIGITAL FILTER. ( P15)
LOCK RANGE ADJUST
Adjust the lock range. ( P15)
1
AUTO STANDBY
SN29403157_PD-70AE_En.book 16 ページ ２０１７年８月２４日 木曜日 午後４時２１分