#
To go to the next group of function names,
touch
NEXT
.
#
To return to the previous group of function
names, touch
PREV
.
#
When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION
,
AUTO EQ
and
AUTO TA
will be can-
celled.
#
When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
#
When selecting FM as the source, you cannot
switch to
SLA
.
#
When playing other than the DVD disc, you
cannot switch to
DYNAMIC RANGE CONTROL
.
#
When neither
FRONT-L
nor
FRONT-R
is se-
lected in
POSITION
, you cannot switch to
TIME ALIGNMENT
.
#
When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to
DOLBY PRO LOGIC II
.
2
Touch ESC to return to the ordinary dis-
play.
#
To return to the previous display, touch
BACK
.
Using the sound field control
The SFC function creates the sensation of a
live performance.
!
The acoustics of different performance en-
vironments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or re-
verberations. Those factors are programed
into the SFC circuitry to recreate the acous-
tics of various performance settings.
1
Press EQ and hold to switch to SFC
function.
#
To switch to equalizer function, press
EQ
and
hold again.
2
Press EQ to select the desired SFC
mode.
MUSICAL
(musical)
—
DRAMA
(drama)
—
ACTION
(action)
—
JAZZ
(jazz)
—
HALL
(hall)
—
CLUB
(club)
—
OFF
(off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e.,
MUSICAL
,
DRAMA
or
ACTION
), we
recommend turning Dolby Pro Logic II on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e.,
JAZZ
,
HALL
or
CLUB
), we recommend turning Dolby
Pro Logic II off.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1
Touch POSITION on the DSP function
menu.
2
Touch
c
/
d
/
a
/
b
to select a listening po-
sition.
Touch one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Key
Display
Position
c
FRONT-L
Front seat left
d
FRONT-R
Front seat right
a
FRONT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
touch the same key again.
Available accessories
En
71
Section
04
A
vailable
accessories
