Switching the auxiliary 1 setting
%
Touch AUX1 on the initial menu to se-
lect desired setting.
!
VIDEO
–
an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
!
AUDIO
–
auxiliary device connected with
stereo mini plug cable
!
OFF
–
No auxiliary device is connected
Switching the auxiliary 2 setting
%
Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
#
To turn auxiliary 2 setting off, touch
AUX2
again.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
FULL
) or subwoofer (
S.W
) con-
nection. If you switch the rear output setting
to
S.W
, you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL
). When rear output is
connected to full range speakers (when
FULL
is selected), you can connect other full range
speakers (
REAR
) or a subwoofer (
S.W
) to the
RCA rear output.
!
When the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you
cannot operate this function.
1
Touch REAR SP on the initial menu.
2
Touch
c
or
d
next to REAR SP to switch
the rear output setting.
Touch
c
to select full-range speaker and
FULL
appears in the display. Touch
d
to select sub-
woofer and
S.W
appears in the display.
#
When no subwoofer is connected to the rear
output, select
FULL
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
S.W
(subwoofer).
#
When the rear output setting is
S.W
, you can-
not operate the following procedure.
3
Touch
c
or
d
next to PREOUT to switch
the subwoofer output or rear output.
Touching
c
or
d
will switch between
S.W
and
REAR
and that status will be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
33).
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Changing languages for CAUTION
Some operations on this unit are prohibited
while driving or needs to be paid a careful at-
tention when operating. In such case, a cau-
tion appears on the display. You can change
the language of the cautions at this setting.
%
Touch CAUTION LANGUAGE on the in-
itial menu to select your desired language.
Each time you touch
CAUTION LANGUAGE
it
selects languages for CAUTION in the follow-
ing order:
ENGLISH
—
ESPAÑOL
—
FRANÇAIS
Switching the sound muting/
attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
%
Touch TEL to select any of the muting,
attenuation or off.
Touch
TEL
until the desired setting appears in
the display.
!
MUTE
–
Muting
!
ATT -20dB
–
Attenuation (
ATT -20dB
has a
stronger effect than
ATT -10dB
)
!
ATT -10dB
–
Attenuation
Operating this unit
En
39
Section
03
Operating
this
unit
