Connecting your equipment
03
16
En
[D] 5.1 channel surround system & Front
Bi-amping connection (High quality
surround)
•
Speaker System setting: Front Bi-Amp
Bi-amping connection of the front speakers for
high sound quality with 5.1-channel surround
sound.
[E] 5.1 channel surround system & ZONE
2 connection (Multi Zone)
•
Speaker System setting: ZONE 2
With these connections you can
simultaneously enjoy 5.1-channel surround
sound in the main zone with stereo playback
on another component in ZONE 2 (The
selection of input devices is limited.)
Important
• The
Speaker System
setting must be
made if you use any of the connections
shown above other than [A] (see
Speaker
system setting
on page 100).
• Sound does not come through
simultaneously from the front height, front
wide, speaker B and surround back
speakers. Output speakers are different
depending on the input signal or listening
mode.
Other speaker connection
• Your favorite speaker connections can be
selected even if you have fewer than 5.1
speakers (except front left/right speakers).
• When not connecting a subwoofer,
connect speakers with low frequency
reproduction capabilities to the front
channel. (The subwoofer’s low frequency
component is played from the front
speakers, so the speakers could be
damaged.)
•
After connecting, be sure to conduct
the Auto MCACC (speaker environment
setting) procedure.
See
Automatically setting up for surround
sound (Auto MCACC)
on page 37.
L
R
SL
SW
C
SR
Plan D
Front Bi-Amp
L
L
R
R
SL
SW
C
SR
Plan E
ZONE 2
Main zone
Sub zone
VSX-1020_UC.book 16 ページ ２０１０年１月７日 木曜日 午後６時０分
