Additional information
12
114
En
Remote control
When playing certain discs,
none of the receiver’s format
indicators light.
• The disc may not contain 5.1/6.1 channel material. Check the disc packaging
for more on what audio tracks are recorded on the disc.
When playing a disc with the
listening mode set to Auto
Surround or ALC,
2
PL II
or
Neo:6
appear on the receiver.
• Make sure that the receiver is set to
AUTO
or
DIGITAL
(see
Choosing the
input signal
on page 60).
• If a two channel soundtrack is currently playing (including Dolby Surround
encoded), then this is not a malfunction. Check the disc packaging for details
about the audio tracks available.
During playback of DVD-
Audio, the display shows
PCM
.
• This will occur when playing DVD-Audio material over the HDMI connection.
This is not a malfunction.
The power turns off
automatically and some
indicator flashes, or some
indicator flashes and the
power does not turn on.
• See the
Power
section (page 107).
Symptom
Remedy
Cannot be remote controlled. • Set a 5-digit preset code corresponding to the receiver to be operated in the
remote control (see
Operating multiple receivers
on page 76).
• Check whether the receiver’s remote control mode is properly set (see
Remote Control Mode Setup
on page 106).
• Try replacing the batteries in the remote control (see
Loading the batteries
on
page 8).
• Be sure to operate within 7 m (23 feet) and a 30º angle of the remote sensor
on the front panel (see
Operating range of remote control unit
on page 13).
• Check that there are no obstacles between the receiver and the remote
control.
• Make sure that there is no fluorescent or other strong light shining on to the
remote sensor.
• Check the connections of the
CONTROL IN
jack (see
Operating other Pioneer
components with this unit’s sensor
on page 35).
Other components can’t be
operated with the system
remote.
• If the battery ran down, the preset codes may have been cleared. Re-enter the
preset codes.
• The preset code may be incorrect. Redo the procedure for entering preset
codes.
Symptom
Remedy
VSX-1020_UC.book 114 ページ 2010年1月7日 木曜日 午後6時0分