10
En
First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up
to two Bluetooth telephones can be connected simultaneously.
Important
•
Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle’s battery.
•
Be sure to park your vehicle in a safe place and apply the parking brake before operation.
A.CONN
Select [ON] to connect to a Bluetooth device
automatically.
[ON], [OFF]
VISIBLE
Select [ON] so that a Bluetooth device can detect the
unit when the unit is connected via Bluetooth to another
device.
[ON], [OFF]
PIN CODE
Change the PIN code.
1
Press the
M.C.
dial to display the setting mode.
2
Turn the
M.C.
dial to select a number.
3
Press the
M.C.
dial to move the cursor to the next
position.
4
After inputting the PIN code, press and hold the
M.C.
dial.
After inputting the PIN code, pressing the
M.C.
dial
returns you to the PIN code input display, and you can
change the PIN code.
DEV. INFO
Switch the device information on the display between
the device name and Bluetooth device address.
GUEST MODE
Select [ON] to move to the [DEL DEVICE] screen
automatically when the unit has already been paired
with three devices.
[ON], [OFF]
A.PAIRING
Select [ON] to pair the unit and iPhone automatically
when an iPhone is connected to the unit via USB. (This
function may not be available depending on the version
of iOS you are using.)
[ON], [OFF]
Bluetooth telephone
Menu Item
Description
To make a phone call
1
Press
to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
again.
2
Turn the
M.C.
dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the
M.C.
dial to select [MISSED], [DIALLED] or [RECEIVED], then
press to confirm.
4
Turn the
M.C.
dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press
when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
Purpose
Operation
End a call
Press
.
Reject an incoming call
Press and hold
when a call is received.
Switch between the current
caller and a caller on hold
Press the
M.C.
dial.
Cancel a caller on hold
Press and hold
.
