VSX-1017AV-K
71
5
6
7
8
5
6
7
8
C
D
F
A
B
E
8. EACH SETTING AND ADJUSTMENT
8.1 ADJUSTMENT
• There is no information to be shown in this chapter.
8.2 HOW TO UPDATE FIRMWARE
USB (HY model only)
• USB Flash Memory which is saved the firmware file (
"
player.rom
"
file).
Note:
I
n rare cases, it is not able to update the firmware depending on the type of USB flash memory.
I
n such a case, try to use other model of USB flash memory.
[
Necessary Tools
]
1.
T
urn on the unit then press and hold
"
S
O
U
N
D RE
T
R
I
EVER
"
and
"
E
NT
ER
"
key for about 5sec.
2
.
"
USB
"
is appeared on the FL display.
3
.
"T
ES
T
M
O
DE
"
is appeared on the FL display.
4
.
"
C
O
RE*.**
"
is appeared on the FL display. (*.** : F/W version
N
o.)
5. Connect the USB flash memory which is saved the firmware file (
"
player.rom
"
file).
6.
"
UPD
T"
is displayed on the FL display.
7. Wait until
"
F
INI
SHED
"
is appeared on the FL display.
8. Disconnect the USB flash memory then set the function setting to anything other than USB.
9.
T
urn off the unit (Standby mode).
Note:
• Do
NOT
reconnect the USB flash memory which is saved the
"
player.rom
"
file.
• Do
NOT
change the function setting or turn off the power during step 5 through 7.
I
f you do, the updating is failed and it is required to replace the USB flash R
O
M on the USB module.
[
Procedures
]
[
Purpose
]
Refer to this section when updating the USB firmware is required by the service information, etc.
I
t is able to update the USB firmware by using USB flash memory.
