VSX-1017AV-K
8
1
2
3
4
1
2
3
4
C
D
F
A
B
E
2.2 SPECIFICATIONS
FM Tuner Section
Frequency Range .......................... 87.5 MHz to 108 MHz
Usable Sensitivity ...... Mono: 15.2 dBf, IHF (1.6 µV/75
Ω
)
50 dB Quieting Sensitivity ........................Mono: 20.2 dBf
Stereo: 41.2 dBf
Sensitivity (DIN)....................... Mono: 1.1 µV (S/N 26 dB)
Stereo: 50 µV (S/N 46 dB)
Signal-to-Noise Ratio.................. Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Signal-to-Noise Ratio (DIN) ..........................Mono: 62 dB
Stereo: 58 dB
Distortion ........................................Stereo: 0.6 % (1 kHz)
Alternate Channel Selectivity ................. 70 dB (400 kHz)
Stereo Separation....................................... 40 dB (1 kHz)
Frequency Response ................... 30 Hz to 15 kHz ± 1dB
Antenna Input ........................................75
Ω
unbalanced
AM Tuner Section
Frequency Range ....... 531 kHz to 1602 kHz (9 kHz step)
Sensitivity (IHF, Loop antenna) .........................350 µV/m
Selectivity ................................................................30 dB
Signal-to-Noise Ratio...............................................50 dB
Antenna ...................................................... Loop antenna
Miscellaneous
Power Requirements ...AC 220 V to 230 V, 50 Hz / 60 Hz
Power Consumption ...............................................450 W
In standby ................................................................0.5 W
Dimensions......420 (W) mm x 173 (H) mm x 465 (D) mm
Weight (without package) ..................................... 15.0 kg
Furnished Parts
Setup microphone (for Auto MCACC setup) .................. 1
AA/IEC R6P dry cell batteries ........................................ 2
Remote control unit ........................................................ 1
AM loop antenna ............................................................ 1
FM wire antenna............................................................. 1
Warranty card ................................................................. 1
Operating instructions
Amplifier section
Continuous Power Output (Stereo)
Front .........150 W + 150 W (DIN 1 kHz, THD 1 %, 6
Ω
)
120 W + 120 W (DIN 1 kHz, THD 1 %, 8
Ω
)
Continuous Power Output (Multichannel)
Front .........150 W + 150 W (DIN 1 kHz, THD 1 %, 6
Ω
)
120 W + 120 W (DIN 1 kHz, THD 1 %, 8
Ω
)
Center..................... 150 W (DIN 1 kHz, THD 1 %, 6
Ω
)
120 W (DIN 1 kHz, THD 1 %, 8
Ω
)
Surround...150 W + 150 W (DIN 1 kHz, THD 1 %, 6
Ω
)
120 W + 120 W (DIN 1 kHz, THD 1 %, 8
Ω
)
Surround back
.................150 W + 150 W (DIN 1 kHz, THD 1 %, 6
Ω
)
120 W + 120 W (DIN 1 kHz, THD 1 %, 8
Ω
)
Rated Power Output ................................ 130 W + 130 W
(20 Hz to 20 kHz, 0.09 %, 6
Ω
)
Rated Power Output ................................ 110 W + 110 W
(20 Hz to 20 kHz, 0.09 %, 8
Ω
)
• The above specifications are applicable when the
power supply is 230V.
Audio Section
Input (Sensitivity/Impedance)
LINE........................................................... 335 mV/47 k
Ω
Frequency Response (LINE) ..... 5 Hz to 100 000 Hz dB
Output (Level/Impedance)
REC .................................................... 335 mV/2.2 k
Ω
Tone Control
BASS ................................................. ± 6 dB (100 Hz)
TREBLE ............................................ ± 6 dB (10 kHz)
LOUDNESS............... +4 dB / +2 dB (100 Hz/10 kHz)
(at volume position –40 dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE................................................................. 103 dB
Signal-to-Noise Ratio
[DIN (continuous rated power output/50 mW)]
LINE...................................................... 92 dB / 65 dB
Composite Video / S-Video Section
Input (Sensitivity/Impedance) ........................1 Vp-p/75
Ω
Output (Level/Impedance) .............................1 Vp-p/75
Ω
Signal-to-Noise Ratio...............................................65 dB
Frequency Response .............................. 5 Hz to 10 MHz
Component Video Section
Input (Sensitivity/Impedance) ........................1 Vp-p/75
Ω
Output (Level/Impedance) .............................1 Vp-p/75
Ω
Signal-to-Noise Ratio...............................................65 dB
Frequency Response ............................ 5 Hz to 100 MHz
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
VSX-1017AV-K/VSX-1017AV-S
