
DVR-RT602H-S
157
5
6
7
8
5
6
7
8
C
D
F
A
B
E
No.
PORT
SIGNAL NAME
I/O
DESCRIPRION
40
P13/_IRQ3
NC
O Reserved. (L output)
41
P14/_IRQ4
POWER_ON-H
O
VCR block POWER control terminal.
L: At the POWER OFF, it is H: POWER ONing it.
The P. SAVE mode inside is assumed to be L output.
Moreover, it uses it combinedly the FZTAT writing mode setting input.
(writing mode when"H" is input)
42
P15/_IRQ5
CFG_IN2
I
Input terminal for CFG. It is used for Slow stop detection.
43
P16/_IC
BB SECAM-H
O
Measures of OSD display at SECAM. Output terminal for Y/C control
for BLUE_BACK.
L: At PAL.
H: When not is in BLUE_BACK and BLACK BACK in SECAM and
MESECAM
44
P17/_TMOW
S-DET OUT
I
Distinction input terminal of "SQPB and normal VHS.
(two-degree agreement of 10ms)
H: SQPB L: Normal VHS"
45
P67/RP7/TMBI
MESECAM-H
I
Input of MESECAM distinction voltage from Y/C IC.
(two-degree agreement of 10ms)
H:at MESECAM L: The rest
46
P66/RP6/_ADTRG
VV-H
O H: VV picture output. (PLAY, Special reproduction) L: the rest
47
P65/RP5
SECAM-IN
I
Distinction input terminal from SECAM_IC.
(four-degree agreement of 10ms)
H: Excluding SECAM L: SECAM
48
P64/RP4
SECAM-H
O
Terminal for SECAM_IC control.
H: When SECAM is distinguished with MENU by
"COLOR_SYSTEM=SECAM" and "COLPR_SYSTEM=AUTO".
L: Excluding the above-mentioned (With PAL, MESECAM, and AUTO
excluding SECAM)
49
P63/RP3
NC
O Reserved. (L output)
50
P62/RP2
NC
O Reserved. (L output)
51
P61/RP1
TAB_SW
I
Detection terminal for TAB.
52
P60/RP0
NC
O Reserved. (L output)
53
P37/TM0
TUNER_AUDIO_MU
TE-H
O
S/N control when Hi-Fi TAPE reproduces.
H: When reproducing in the VCR mode, it is L: Others.
54
P36/BUZZ
NC
O Reserved. (L output)
55
P35/PWM3
P.SAVE
I
Transition to power saving mode
H : at time usually L : At the power saving
56
Vcc
VCC
-
Power supply terminal.
57
Vss
VSS
-
GND.
58
P27/SYNCI
AUDIO_MUTE-H
O
Control terminal for Audio Mute.
H: Power On/Off, Recoding/Playing, Trick PB, Input Select.
L: during Power Off.
59
P26/SCL0
MPEG_IIC_CLK
O Terminal IIC BUS for MPEGu-con. (CLK)
60
P25/SDA0
MPEG_IIC_DATA
I/O Terminal IIC BUS for MPEGu-con. (DATA)
61
P24/SCL1
IIC_CLK
O Communication terminal for IC/EEPROM. (IIC BUS Clock)
62
P23/SDA1
IIC_DATA
I/O Communication terminal for IC/EEPROM. (IIC BUS Data)
63
P22/SCK1
NC
O Reserved.
64
P21/SO1
NC
O Reserved.
65
P20/SI1
NC
O Reserved.