manualshive.com logo in svg

Pioneer DVR-RT602H-S, Service Manual

Share
Download
Pioneer DVR-RT602H-S Service Manual Download Page 134

DVR-RT602H-S

134

1

2

3

4

1

2

3

4

C

D

F

A

B

E

Press the  ESC  key on the remote control unit for servicing to quit Aging mode and return to Normal 
mode. 

Notes:

• If during recording: Recording is stopped.
• If during playback: Playback is paused.
• If during erasure of all memory data from the HDD, the unit stops after all memory data have been
  erased.

[How to quit]

1

Press the  HDD  key to switch to HDD. 

2

Press the  ESC  key then the  REP.B , and then the  PLAY   keys on the remote control unit for 

     servicing to enter Aging mode.

[How to enter]

During Aging mode, the following operations are repeated in the order shown below.

1

 Erasure of all the memory data from the HDD

2

 Recording for 60 minutes

3

 Playback for 60 minutes

[Description of operation]

During Aging, the number of loops is indicated on the FL display, as shown below.
     [AGING  0001]

If an error is generated, the aging operation stops.

Note:

Indications on the FL display are retained, and this information is also retained as an OSD.

[Tips]

[Aging for the HDD]

*

 

Take caution as all recorded data of the HDD is deleted.

Summary of Contents for DVR-RT602H-S















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands