DVR-RT602H-S
152
1
2
3
4
1
2
3
4
C
D
F
A
B
E
7.2 DISC REMOVAL METHOD
7.3 TAPE REMOVAL METHOD AT NO POWER SUPPLY
1. Remove the Top Cabinet.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Insert a fine rod (wire etc.) into the hole of the LOADER Assy as shown by the arrow.
(Refer to Fig. 1)
The tray is opened.
3. Manually open the tray.
Fig. 1
LOADER Assy
1. Remove the Top Cabinet, Front Cabinet and DVD Block.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Remove one screw of the Loading Motor from the insert hole for screw driver and remove the Loading Motor.
3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
4. Rotate the Clutch Ass'y either of the derections to wind the Video Tape in the Cassette Case.
5. Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to scratch on the
tape.
Fig. 1
Fig. 2
Capstan DD Unit
Main Chassis (Front Side)
Clutch Assy
Main Cam
Pinch Roller Cam
Screw
Loading Motor
Insert hole for screwdriver
