Pioneer DVR-210-S, Manual

Page: 68 / 73

Table 2: Key operations in Specific Channel Setting mode
(effective only during recording/playback stop)
Key Operation Setting (
∗
: Default) Remarks
DIG/ANA
Switches cyclically between General
Setting mode and Specific Channel
Setting mode.
– –
INPUT SELECT,
C/–
(
∗
R)
Switches inputs or channels. – –
2
⋅
3,
⋅
3
3
(
∗
1) Sets Sync AGC. ON (
∗
) / OFF –
4
CHAPTER SKIP,
CHAPTER SKIP
¢
Sets Threshold level.
(
∗
) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
–
e
STILL STEP,
STILL STEP
E
Sets Threshold level.
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
–
• Normal:
The value is fixed, with no display of
the value.
–
• Auto Threshold Level:
0-8 (Default: 0)
The value can be changed with the
e
or
E
key.
• Manual Threshold Level:
0-8 (Default: 0)
The value can be changed with the
e
or
E
key.
• Pedestal Level:
0-8 (Default: 0)
The value can be changed with the
e
or
E
key.
PLAY
All channels assigned to have specific
settings are canceled, and the
specific settings are reset to their
default values.
–
Settings of General Setting mode
are not affected.
CLEAR
If the channel currently selected is
assigned to have specific settings,
that assignment is canceled.
(If that channel is canceled, the
number of remaining channels for
which specific channel settings can
be made increases by 1.)
–
Pressing the key resets the settings
of Specific Channel Setting mode for
that channel to the initial values.
Settings of General Setting mode
are not affected.
PAUSE
The specific-setting data for the
currently selected channel are reset
to their default values.
(But the assignment of a channel
having specific settings is not
canceled.)
–
Pressing the key resets the settings
of Specific Channel Setting mode for
that channel to the initial values.
Settings of General Setting mode
are not affected (retained).
ESC
Exits AVIO setting for specific areas,
clearing the OSD.
– –
∗
R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.