Pioneer DVR-210-S, Manual

Page: 62 / 73

DV /1394 DEBUG MODE
(DV/1394) Init: OK AV: 01 DV: 01 INT4: 02
[Recoder] GUID: 00E036000160001 IRM
iPCR: C03F0000 oPCR: 0000007A
[DV] GUID: 0080880303480E96
VN: VICTOR MN: GR-D50K
TM: C3 TS: 75 CT: 32 WP: 01 PS: FF OS: 00
[DVdecoder: Yes ]
TC: 00h20m35s02f RD: 02/02/05 RT: 10h34m50s
ASPECT: 4:3 CGMS: 000000 APSTB: 00 DEC: 525-60
SF: 32kHz QU: 12bit AMODE: 4) Stereo
[DVencode: No ]
TC: --h--m--s--f RD: --/--/--/-- RT: --h--m--s
ASPECT: -------- CGMS: -- APSTB: --
1
2
4
5
6
7
8
9
10
11
12
13
3
Press the ESC, DISP, then "3" keys, in that order.
Boldface alphanumerics : Fixed indications
Non - boldface alphanumerics : Variable indications
No. Item Description Remarks
1
Init
Whether the initialization of uPD72893A
(1394LINK & DVcodec IC) has been completed
(OK) or not (NG)
In a case of NG, communication with uPD72893A may have
failed.
AV Number of AV devices on the local bus
DV Number of DV devices on the local bus
If the number does not become 01 even if a DV device is
connected, identification of that device fails.
INT4
Number of executing INT4(PIO) interrupt
processing routines until a POWER ON
notification arrives from uPD72893A (normally, 02)
2
GUID GUID set in ConfigROM of the unit
In a case of ROOT (IRM), IRM is displayed at the rightmost of
the GUID indication
3
iPCR iPCR value of the unit
oPCR oPCR value of the unit
4
GUID
GUID set in ConfigROM of the connected DV
device
Data are displayed only if one DV device is identified. If the
connected DV device is ROOT (IRM), IRM is displayed at the
rightmost of the GUID indication
5
VN
Vendor name set in ConfigROM of the connected
DV device
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
MN
Model name set in ConfigROM of the connected
DV device
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
6
TM Transport Mode data obtained from the DV device
Data are displayed only if one DV device is identified.
TS Transport State data obtained from the DV device
CT Cassette Type data obtained from the DV device
WP Copy-protection data obtained from the DV device
PS Power-state data obtained from the DV device
OS
Output signal mode data obtained from the DV
device
7
[DVdecode:XXX]
Whether Yes (in the process of requesting DV
input) or No is indicated in XXX
Normally, Yes is indicated only when CH is set to DV