!
SLA (source level adjustment) setting (refer
to
Adjusting source levels
on page 67)
!
Dynamic range control (refer to
Using the
dynamic range control
on page 67)
!
Direct control setting (refer to
Using the di-
rect control
on page 67)
!
Down-mix setting (refer to
Using the down-
mix function
on page 67)
1
Use MULTI-CONTROL to select
AUDIO RESET.
Refer to
Adjusting initial settings
on page 48.
2
Press MULTI-CONTROL to display OK.
#
To cancel resetting the audio functions, press
BAND
.
3
Push MULTI-CONTROL right to display
REALLY?.
#
To cancel resetting the audio functions, press
BAND
.
4
Press MULTI-CONTROL to reset audio
functions.
COMPLETE
appears in the display.
Other Functions
Turning the clock display on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK
turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing
CLOCK
turns
the clock display on or off.
Switching the display indication
and button illumination
Display indication and button illumination can
be switched on or off.
%
Press and hold DISP OFF.
Pressing and holding
DISP OFF
switches the
display indication and button illumination on
or off.
#
While the display indication is turned off,
CLOCK
/
DISP OFF
button lights up.
#
Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
Operating this unit
En
52
Section
02
