!
When this unit
’
s blue/white lead is connected
to the car
’
s auto-antenna relay control term-
inal, the car
’
s antenna extends when this
unit
’
s source is turned on. To retract the an-
tenna, turn the source off. (When you con-
nected a Pioneer multi-channel processor
(DEQ-P7650) to this unit, auto-antenna cannot
be controled.)
Adjusting the volume
%
Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn
MULTI-CONTROL
to
increase or decrease the volume.
With the remote control, press
VOLUME
to in-
crease or decrease the volume.
Tuner
Basic Operations
When the separately sold display is connected
to this unit, the listed information will appear
on it.
%
Select a band
Press
BAND
.
#
Band can be selected from among
FM1
,
FM2
,
FM3
or
AM
.
%
Manual tuning (step by step)
Push
MULTI-CONTROL
left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right,
and then release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
While pushing and holding
MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL
.
Storing and recalling broadcast
frequencies
If you press any of the preset tuning buttons
1
to
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!
Only the remote control can operate this
function.
!
Six stations for each band can be stored in
memory.
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
Operating this unit
En
18
Section
02
