17
03
English
Section
En
Operating this unit
Camera Polarity:
Select camera polarity Battery, Ground or
Off.
Battery: When the polarity of the connected
lead is positive while the gear shift is in
REVERSE (R) position
Ground: When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Off: The rear view camera is disabled.
AV Input:
Select AV Input on or off.
AUX:
Select auxiliary device on or off.
Demo:
Select Demo, press [M.C.] or [ENTER] to
run. “Demo” will be flashed on the top right
corner, then Demo mode is engaged.
Text Scroll:
Select Text Scroll on or off.
Video
Aspect Ratio:
4:3: For 4:3 TV picture.
16:9: For 16:9 wide screen TV.
Note
There is no 16:9 specification for VCD; for
VCD the video output only in 4:3 format; in
our setting menu, 4:3 or 16:9 setting is for
video monitor setting, but not mean that
DVD will output video signal in 4:3 or 16:9
format; which means current our TFT is in
16:9, when we play VCD, if we want to keep
the video signal without distortion, the video
should not be set to full screen like 16:9.
Language
Language:
Select on-screen display language.
Subtitle:
Select subtitle language.
Options available depending on DVD disc.
Audio:
Select audio language.
Options available depending on DVD disc.
DVD Menu:
Select DVD menu language.
Options available depending on DVD disc.
Audio
Loudness:
Turn on or off the loudness.
Subwoofer:
Selecting 80Hz, 120Hz or 160Hz to activate
subwoofer-out.
Selecting subwoofer off to activate rear line-
out.
Sub Volume:
Select subwoofer volume: 0 to 33.
• Sub Volume couldn't be adjusted when
SubWoofer Off is selected.
Radio
LOC / DX:
Select radio local or distant.
LOC: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
Stereo / Mono:
Select FM stereo or mono.
FM Step(FM tuning step):
Select FM step 50kHz or 100kHz.
seek tuning step
• The tuning step remains at 50kHz during
manual tuning.
AM Step(AM tuning step):
Select AM step 9kHz or 10kHz.
The AM tuning step can be switched
between 9kHz and 10kHz.
• When the setting is changed, the
frequency and preset channels are
initialized.
