!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
WARNING
!
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!
Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!
Use one
CR2025 (3 V)
lithium battery.
!
Remove the battery if the remote control is not
used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic objects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions
’
rules that apply in your
country/area.
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1
Press
.
Returning to the main menu
1
Press and hold
.
Returning to the ordinary display
Canceling the initial setting menu
1
Press
B (BAND/ESC)
.
Tuner
Basic operations
Selecting a band
1
Press
B (BAND/ESC)
until the desired band (
F1
,
F2
for FM or
MW/LW
) is displayed.
Manual tuning (step by step)
1
Press
c
or
d
.
Seeking
1
Press and hold
c
or
d
, and then release.
You can cancel seek tuning by briefly pressing
c
or
d
.
While pressing and holding
c
or
d
, you can skip
stations. Seek tuning starts as soon as you re-
lease
c
or
d
.
Note
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to the next
page).
Storing and recalling stations
for each band
Using preset tuning buttons
1
When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2
Press one of the preset tuning buttons
(1 to 6) to select the desired station.
#
You can also recall stored radio stations by
pressing
a
or
b
during the frequency display.
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
%
Press
.
Program service name
—
PTY information
—
Frequency
#
PTY information and the frequency appear on
the display for eight seconds.
En
11
Section
02
Operating
this
unit
Operating this unit
