8
En
Connecting Up
2
Easy Setup
This easy setup is the minimum set of connec-
tions you need to start watching DVD video
discs. Both sound and picture are fed directly
to your TV using the supplied audio and video
cables. For other possible connections, see
pages 9 and 10
.
Connecting audio and video cables
Be sure to insert each
plug fully for the best
connection. The plugs
and jacks are colour-
coded to make
connection easier.
Connecting control cables
Use a stereo mini-plug cable (not supplied) to
connect the
CONTROL OUT
of your Pioneer
amplifier/receiver to the
CONTROL IN
of this
unit. This allows you to operate this unit with
the amplifier/receiver’s remote control. See
the instruction manual that came with your
amplifier/receiver for more detailed instruc-
tions. Add more components to the chain by
connecting the
CONTROL OUT
of this unit to
the
CONTROL IN
of other Pioneer compo-
nents.
Important
• In order to properly ground this player, you
must connect at least one cable (not
including an optical cable) in addition to the
control cable.
• If the
CONTROL IN
jack on the player’s rear
panel is connected to the
CONTROL OUT
jack of another Pioneer component, point
the remote control at the other component
to operate the player.
AC IN
VIDEO
OUT
S-VIDEO
OUT
D1 / D2
OPTICAL
IN
OUT
COAXIAL
SUB
WOOFER
CENTER
SURROUND
FRONT
1
P
R
P
B
Y
2
1
1
2
L
L
R
R
2
AUDIO OUT
(5.1CH)
DIGITAL OUT
CONTROL
AUDIO OUT
(2CH)
COMPONENT VIDEO OUT
VIDEO OUT
1
2
3
Connect to a composite video input
on your TV using the supplied
yellow video cable.
Plug into a standard AC
wall outlet.
Connect to a pair of stereo audio inputs
on your TV using the supplied red/white
stereo audio cable.
Important
Before making or changing any rear panel connec-
tions, make sure that all components are switched
off and unplugged from the wall outlet.
