Pioneer DV-K302CD Operating Instructions Manual Download Page 50

Page: 50 / 64

Repeat Play

– DVD/Super VCD/Video CD/CD

You can repeat an entire title, chapter or track, or just a
part.

Repeat play of a chapter/track

Press

REPEAT

once during playback of the

chapter or track you want to repeat.

• In some DVDs, the descriptions here apply to titles,

not chapters.

Repeat play of a title/disc

Press

REPEAT

twice during playback of the title or

disc you want to repeat.

• With DVDs, the title continues playing until the end,

and then playback starts once more from the
beginning of that title.

• With Super VCDs/Video CDs and CDs, a disc is

considered a single title, so the entire disc is repeated.

Repeat play of all discs

Press

REPEAT

three times during playback.

• All discs loaded in the player are repeated.
• Repeat All cannot be used during playback of the disc

with a DVD menu. It will be canceled when you start
playback of a disc with a DVD menu.

To cancel repeat play

Press

CLEAR

. Playback continues, but the repeat

function is canceled.

Repeat play of a specified section

Press

A–B

at the beginning and end of the section

you want to repeat.

• When

A–B

is pressed a second time, the disc returns

to the location where

A–B

was pressed first and plays

the selected section repeatedly.

• You can only perform A–B repeat within the same

title.

• This function is not possible with Super VCD.

To cancel A–B repeat play

Press

CLEAR

. Playback continues, but the repeat

function is canceled.

Return to a specified location on a
disc

Press

A–B

at the desired location.

When you want to return to the specified
location, press

PLAY

• This function is not possible with Super VCD.

To clear the specified location

Press

CLEAR

to cancel repeat play or to clear the

specified location that was set using

A–B

Notes

• With some DVD discs, there may be times when repeat

playback is not possible. In these cases, the

mark will

appear on the screen.

• With Super VCDs/Video CDs, repeat play is not possible when

the menu is displayed (PBC playback). To perform repeat play,
start playback without displaying a menu by pressing
PLAYBACK CONTROL and then press

REPEAT

• Playing back a DVD with menu during A–B repeat play will

cancel the repeat function.

A-B

REPEAT

PLAY

CLEAR

Summary of Contents for DV-K302CD

































































Search results

Summary of Contents for DV-K302CD

Reviews:

Related manuals for DV-K302CD

Brands by name

Popular brands

Pioneer DV-K302CD, Operating Instructions Manual

Search results

Summary of Contents for DV-K302CD

Reviews:

Related manuals for DV-K302CD

Brands by name

Popular brands