26
Playing DVDs, Super VCDs,
Video CDs and CDs
– DVD/Super VCD/Video CD/CD
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the previous section to set
up the player to correspond to your home system.
Having made these settings, you are now ready to start
using the player to enjoy DVDs, Super VCDs, Video CDs,
and CDs.
3
Press
OPEN/CLOSE
0
.
The disc tray comes out.
4
Load a disc.
• Load a disc with the label side facing up, using
the disc tray guide to align the disc.
• Labels indicating disc numbers (1 through 3) are
affixed to the disc tray. Press
DISC CHANGE
to
rotate the disc tray and then load a disc onto the
disc tray.
• The number of
DISC CHANGE
correspond with
the buttons on the labels affixed to the disc tray.
5
Press
PLAY
3
(
3
on the front panel).
• The disc tray closes, and the disc located in the
front on the left side of the disc tray is played.
• Press one of the
DISC
(1 through 3) to begin
playback of the selected disc.
•
Depending on the disc, a menu may be
displayed. If a menu is displayed, proceed to
step 6.
6
Select the item you want to view.
• When a DVD is loaded:
Use the cursor buttons (
2
/
3
/
5
/
∞
) to select the
item, then press
ENTER
. You may also be able to
use the number buttons for direct selection
(Depending on the disc,you may not be able to
use the number buttons).
• When a Super VCD or Video CD is loaded:
Use the number buttons to select the item.
Notes
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder.
Check that the digital audio output format selected in the
Audio 1
menu corresponds to the audio components you have
made connections to (page 33).
• The TV screen size is factory set to present the wide screen
format (16:9 aspect ratio). If you have a standard TV screen
(4:3 aspect ratio), this setting can be changed to match your TV
screen size in the
Video
menu (page 34).
Getting Started
Using Your DVD
Player
1
1
2
3
1
2
1
2
3
3
1
1
2
1
[Models having a STANDBY/ON button on the
main unit] Press
(
STANDBY/ON
on the
front panel).
[Models having a POWER switch on the main
unit] Press
POWER
on the front panel.
• When the STANDBY indicator lights, you can
power on with the remote control.
2
Press
KARAOKE MODE
to select Normal
mode.
Karaoke mode: When using the Karaoke function
Normal mode: When enjoying movies or music
• Each time you press this button, the setting
changes as follows:
=
Karaoke
Normal
+
6
5
3
1
5
6
1
4
3 5
2
6
5
4
