21
Setting Up the Player
SETTING UP THE PLA
YER
En
The
[Analog Jacks]
screen establishes whether analog connections
have been made to an AV amplifier or receiver, and if connections are
made, whether the connections made are for 2 channel stereo or for
5.1 channel surround sound.
Settings:
2 Channel (Factory setting)
Select if you have made 2 channel connections to an
amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel connections to an AV
amplifier or receiver with the appropriate inputs. When this
setting is selected, several screens will follow to determine
the configuration of your speaker system. These screens are
described in the section
‘To coordinate your speaker
system for 5.1 channel output’
on this page.
Not Connected
Select if you have not made analog audio connections.
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
2 Channel jacks for L/R
Analog Jacks
Not Connected
5.1 Channel
2 Channel
Amp Connection
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Center speaker is connected
to an amplifier
Center Speaker
Not Present
Prese
Present
Amp Connection
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Surround speakers are connected
to an amplifier
Surround Speakers
Not Present
Prese
Present
Amp Connection
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Sub-woofer is connected
to an amplifier
Sub-woofer
Not Present
Prese
Present
Amp Connection
Setting analog audio connections to an AV amplifier or receiver
To coordinate your speaker system for 5.1 channel output
When
“5.1 Channel”
is selected in the
[Analog Jacks]
screen, the
following screens appear to determine the configuration of your
speaker system. In all of the following screens, select
“Present”
if the
speaker in question is present in your system, and
“Not Present”
if it
is not.
[Center Speaker]
[Surround Speakers]
[Sub-woofer]
Settings:
Present (Factory setting)
Not Present
Note
If
“Not Present”
is selected for both
[Center Speaker]
and
[Surround
Speakers]
,
[Sub-woofer]
is automatically set to
“Not Present”
and the
[Sub-woofer]
screen is not displayed.
