En
8
b
EQ (HI, LOW) controls (page 11 )
These adjust the tone quality of the [
MIC1
] and [
MIC2
] channels.
c
MIC LEVEL control (page 11 )
Adjusts the level of the sound output from the [
MIC1
] channel or
[
MIC2
] channel.
d
MIDI ON/OFF buttons
Switches the MIDI function on and off.
e
USB connection indicator
An indicator lights when a computer is connected. It flashes when
the driver software is not installed on the computer.
f
USB terminal (page 10 )
Connect the computer.
g
Input selector switches (page 11 )
Selects the input source of each channel from the components con-
nected to this unit.
h
CLIP indicators
An indicator lights when sound with an excessively high volume is
input to a channel.
i
TRIM control (page 11 )
Adjusts the level of audio signals input in each channel.
j
EQ/ISO (HI, MID, LOW) controls
These adjust the sound quality of the respective channels.
k
Channel Level Indicator (page 11 )
Displays the sound level of the respective channels before passing
through the channel faders.
l
COLOR control
This changes the parameters of the SOUND COLOR FX of the differ-
ent channels.
m
Channel Fader (page 11 )
Adjusts the level of audio signals output in each channel.
n
CROSS FADER ASSIGN (A, THRU, B) selector switch
(page 11 )
Sets the output destination of each channel to [
A
] or [
B
].
o
Crossfader (page 11 )
Outputs audio signals assigned by the crossfader assign switch cor-
responding to the curve characteristics selected by [
CROSS FADER
]
(Crossfader Curve Selector Switch).
p
MASTER LEVEL control (page 11 )
Adjusts the audio level output from the [
MASTER1
] and [
MASTER2
]
terminals.
q
Master Level Indicator (page 11 )
Displays the audio level output from the [
MASTER1
] and [
MASTER2
]
terminals.
r
BALANCE control
Adjusts the left/right balance of the sound output from the
[
MASTER1
] terminals, etc.
s
BOOTH MONITOR control (page 11 )
Adjusts the level of audio signals output from the [
BOOTH
] terminal.
t
EQ CURVE (ISOLATOR, EQ) selector switch
Switches the function of the [
EQ/ISO
(
HI
,
MID
,
LOW
)] controls.
u
CH FADER (
,
,
) selector switch
Switches the channel fader’s curve characteristics.
v
CROSS FADER (
,
,
) selector switch
This switches the crossfader curve characteristics.
w
SEND/RETURN (1/4” JACK,
) selector switch
Switches the I/O source of the SEND/RETURN channel.
This selects either the device connected to the [
SEND/RETURN
]
terminals on the back of the unit or the device connected to the
mobile device connection terminal on the operation panel.
x
RETURN TYPE (AUX, INSERT) selector switch
Selects the SEND/RETURN method.
y
Mobile device connection terminal (USB port)
Connect a mobile device.
z
SEND/RETURN ON/OFF button
Turns SEND/RETURN on and off.
A
SEND/RETURN LEVEL control
Adjusts the sound level of SEND/RETURN.
B
Main unit display
Displays the effect name, BPM, effect parameter, etc.
C
X-PAD
BEAT FX is on while this is touched. Also, the parameter can be
adjusted depending on the place touched.
D
BEAT
c
,
d
buttons
Set the beat fraction for synchronizing the effect sound.
E
TAP button
When the BPM measurement mode is set to [
TAP
], tap the button
with a finger to input the BPM manually.
F
QUANTIZE (UTILITY, WAKE UP) button
—
QUANTIZE
: When the QUANTIZE function is turned on for BEAT
FX, the effect is applied to the sound without getting out of tempo
with the currently playing track.
—
UTILITY
: Displays the [
UTILITY
] screen.
—
WAKE UP
: Cancels the standby state.
G
AUTO/TAP button
Switches the BPM measurement mode.
H
FX FREQUENCY button
Select the range to apply BEAT FX. BEAT FX is applied to the range of
the button that is lit.
I
Beat effect selector switch
Switches the BEAT FX effect type.
J
Effect channel selector switch
Switches the channel to which the BEAT FX is to be applied.
K
TIME control
Adjusts the BEAT FX’s time parameter.
L
LEVEL/DEPTH control
Adjusts the BEAT FX’s quantitative parameter.
M
Beat effect ON/OFF button
Turns BEAT FX on and off.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
