manualshive.com logo in svg

Pioneer DJM-700-K, Service Manual, Page: 36 / 140

Share
Download
Pioneer DJM-700-K Service Manual Download Page 36

DJM-700-S

36

1

2

3

4

1

2

3

4

C

D

F

A

B

E

 

4)  Download the new firmware to the microcomputer. 

  Setup 

procedure: 

 

 

Select "Autoprocedure (EPV)" from the "Device" menu or click the "Autoprocedure" icon.

 

5)  Close the QB-Programmer and disconnect the host machine from the MINICUBE2 (USB).

 

 

Update with Autoprocedure is performed in the following order. 

 

 

• The old firmware is erased from the microcomputer (erase). If old firmware does not exist (blank), this step is skipped. 

 

 

• New firmware is downloaded (Program) 

 

 

• Verification performed (Verify) *2 

 

 

• Checksum performed (Checksum) *2 

 

 

*2 Must be configured under command options. 

 

 

     However, you can still use the verify and Checksum functions. 

Erase

Checksum

Program

Verify

click

Erase end

Program start

Program end

Verify start

Verify end

Checksum start

Update complete

Note:

 After updating is completed, enter Mode 1 (Confirmation of software version) of Test mode 

 

to check if the versions have been all updated.

Summary of Contents for DJM-700-K













































































































































Reviews:

No comments