Pioneer DJM-700-K, Service Manual, Page: 105 / 140

DJM-700-S
105
5 6 7 8
5 6
7
8
C
D
F
A
B
E
10.27 WAVEFORMS
Waveform Measurement Conditions
IN or OUT
Measure
CH
IN CH
IN LEVEL
(Trim Max)
IN FREQUENCY RL Other settings Other settings
IN CD CH1 -6dB 1K
IN LINE CH1 -6dB 1K
IN PHONO CH3 -46dB 1K
IN MIC 1/2 MIC 1/2 -46dB 1K
IN RETURN RETURN -6dB 1K Center the Level/Depth VR
OUT MASTER1/2 CH1/CD -6dB 1K 10K
Ω
Center all EQs/FADER at Max
OUT BOOTH CH1/CD -6dB 1K 10K
Ω
Center all EQs/FADER at Max
OUT REC CH1/CD -6dB 1K 10K
Ω
Center all EQs/FADER at Max
OUT SEND CH1/CD -6dB 1K 10K
Ω
Center all EQs/FADER at Max
OUT HP CH1/CD -6dB 1K 32
Ω
Center HP LEVEL Center all EQs/FADER at Max
OUT DIG OUT CH1/CD -6dB 1K 75
Ω
Center all EQs/FADER at Max
Switch type settings (fixed) * The output waveform is measured at the CH1CD input.
MASTER ATT
• • • •
0dB
fs • • • • • • • • • 96K
MONO/ST
• • • • • •
ST
CH FADER CURVE
• • •
FLAT
CROSS FADER CURVE • • • CENTER
CROSS FADER ASSIGN
• • •
THRU
Notes:
• On grounding during diagnosis of the MAIN Assy
When the flexible cables or other cables that connect between the MAIN Assy and INPUT or OUTPUT Assys are
removed, ground for some audio analog signals may be shifted upward from the chassis. In such a case, connect the
frame of the phono plug (GND) and the chassis (GND) then perform diagnosis.
• On grounding during diagnosis of the INPUT or OUTPUT Assy
When the INPUT or OUTPUT Assy is removed, ground for some audio analog signals may be shifted upward from the
chassis. In such a case, connect the frame of the phono plug (GND) and the chassis (GND) then perform diagnosis.