59
Audio Adjustment
9. Get out of the car and close the door within 10 seconds, if a 10-second count-
down starts.
The measurement tone (noise) is output from the speakers, and Auto-equalizing (acoustic
characteristics measurement and compensation) begins.
Note:
• When all speaker units are connected, Auto-equalizing is completed in about 7 or 8 minutes.
• To cancel Auto-equalizing part way through, press any button.
10. When Auto-equalizing is completed, a message is displayed as below.
When correct measurement of car interior acoustic characteristics is not possible, an error
message is displayed. (Refer to “Error Codes of Auto-equalizing Function” on the next
page.)
11. To cancel the Auto-equalizing mode, press any button.
12. Store the microphone carefully in the glove compartment.
Store the microphone carefully in the glove compartment or other safe place. If the micro-
phone is subjected to direct sunlight for an extended period, high temperatures may cause
it to deform, change color and malfunction.
7
When Auto-equalizing was performed correctly:
AUTO EQ ON applies to, and the “AUTO EQ” indicator lights for, all equalizer curves
that are called. (Refer to page 46.) The called equalizer curve is set after it is corrected by
Auto-equalizing.
“AUTO EQ”
